Bell Sports 12.5" Standard Schrader Bicycle Inner Tube ( 2 pack )

Description

Bell Sports 12.5" Standard Schrader Bicycle Inner Tube ( 2 pack )
Get reliable performance with the Bell Sports 12.5" Standard Schrader Inner Tube. It's an outstanding replacement for bike tubes that require high air pressure to perform at their peak.
This bicycle inner tube valve is made with mold cured rubber to ensure consistency and durability. It's designed to fit tires that have a width ranging from 1.75" to 2.25". The side panel includes instructions on how to replace an inner tube so that you can be up and running faster.
Bell inner tube fits tires of widths 1.75" - 2.25"
Ideal for bike tubes that require high air pressure to perform well
Side panel has detailed instructions on how to replace inner tube
Mold cured rubber for consistent side wall–prevents high pressure blow outs
High quality, reliably tested inner tube
Tube Weight - 110g
Valve type & length: Schrader; 35mm with cap
Great for kid bike tires
How To Replace a Tube:
Requires two tire levers: 1: Remove Tire: Remove wheel from bike; use thin end of tire lever to pry tire from rim; insert 2nd lever 3 spokes away. Move levers in opposite direction. 2: Remove Tube: Reach in between the rim and tire and remove tube; check inside of tire for sharp objects and remove them. 3: Insert New Tube: Slightly inflate tube, just enough to give it some shape; insert new tube valve through valve hole in wheel. 4: Reset New Tire: Use hand to reset tire back on wheel; pry last part of tire onto rim with tire levers if needed. Be careful not to pinch to tube between the tire and rim! 5: Inflate Tire: Inflate tire about half way then check to make sure it is correctly seated all the way around the rim; inflate to recommended PSI on tire sidewall. See side panel for how to replace a tube.