Front Inner Axle Seal Installer for Ford Super Duty 1978-2016 Dana 50 60 Axle

Description

Front Inner Axle Seal Installer for Ford Super Duty 1978-2016 Dana 50 and 60 Axle
Application
Fit for All FordSuper Duty straight axle trucks 1978 – 2016 Dana 50 / Dana 60 Axle
Function of Inner Axle Seal Installer
To repair your Super Duty Truck of Oil Leaking out the ends of the front axles tubes, allows
one technician working alone to install each seal in minutes to the correct depth without seal
damage.
Package Included
1PC Seal driver and 1PC 1/2 inch driving adapter.
Installation Instruction
Disassemble the front axle and then remove the old inner axles seals.
Install a new seal onto the seal driver, the seal is designed to snap into place on the adapter.
Position the seal driver and seal assembly squarely into the housing.
Assemble 1/2 inch extensions as necessary to reach from the seal driver to the outer end of
the axle housing.
Install the driving adapter onto the last 1/2 inch extension and drive the seal firmly into place
by hammering firmly on the driving adapter.
Be sure to seat the seal all the way. There will be a significant change in tone when the seal is
seated. (The seal driver is designed to set the correct seal depth in the axle and cannot be
driven any further when the correct depth is reached.)
Finally, remove the seal driver and reassemble the axle, then finish the installation.