INSL-X SXA11009A-01 Stix Acrylic Waterborne Bonding Primer, 1 Gallon, White

Description

INSL-X SXA11009A-01 Stix Acrylic Waterborne Bonding Primer, 1 Gallon, White
Premium-quality, acrylic-urethane primer-sealer with unparalleled adhesion to the most challenging surfaces, including glossy tile, PVC, vinyl, plastic, glass, glazed block, glossy paint, pre-coated siding, fiberglass, and galvanized metals.
Use on Drywall, plaster, ceiling, acoustical tile, wood trim and doors, Formica, ceramic tiles, glossy surfaces, PVC plastic, masonry walls, wood, trim, shutters, masonry, stucco, concrete, cement block, galvanized metal, aluminum, and other challenging surfaces.
Bonds to "hard-to-coat" surfaces and can be top coated with almost any product
Cures in temperatures as low as 40 F
300 - 400 square feet per gallon
Low VOC and easy soap and water cleanup
Apply when air and surface temperatures are above 35 F. Do not apply in direct sunlight or on a hot surface. Avoid rain, moisture or high humidity for the first 24 hours of curing. Not intended for immersion service or continuous water contact
Not for below grade applications. Not recommended for use over polyethylene or polypropylene. Stix must be top coated for exterior use. Not recommended over Kynar (and similar finishes) unless tested and approved by the buyer
Size Name:1 Gallon Stix Waterborne Bonding Primer is a premium quality, waterborne, acrylic urethane primer sealer with unparalleled adhesion to the most challenging surfaces, including PVC, vinyl, plastic, glass, tile, glazed block, glossy paints, pre-coated siding, fiberglass, and galvanized metals. Stix primer is also ideal for use on plaster, drywall, wood, and non-ferrous metals, where a low ambient or surface temperature would present a problem for conventional primers. This house paint primer offers an extremely hard film when cured. Use it on interior and exterior surfaces and topcoat with almost any type of coating including Alkyd, Acrylic Latex, Urethane, Epoxy, and Lacquer finishes. Stix waterborne primer levels to a smooth surface and cleans up with soap and water. Interior and exterior surfaces including drywall, plaster, ceiling, acoustical tile, wood trim & doors, Formica, ceramic tiles, glossy Surfaces, PVC plastic, masonry walls, wood, trim, shutters, masonry, stucco, concrete, cement block, galvanized metal, aluminum, etc.