Multi-Purpose Primer - Use on Concrete and Wood, Water-Based Non-Toxic and Fa...

Description

Multi-Purpose Primer
is a high performance engineered bonding aid formulated to improve the adhesion of membranes to a variety of substrates. Our Multi-Purpose Primer is a single component composition suitable for easy and safe application to numerous surfaces including concrete, wood, and high-density polyethylene by means of brush, rollers, or spray equipment.
Application:
Multi-Purpose Primer may be applied as a single component system using either manual or spray application methods. Manual application can be carried out using a conventional brush or roller equipment, or alternatively, the product may be sprayed using a delivery system and nozzle appropriate for the viscosity of the material.
The recommended coating thickness is between 4-5 mils DFT (.01 mm). For best results, the Multi-Purpose Primer should be applied to a dry surface that is free of dirt, debris, oil, silicone, and grease. Do not apply if rain is forecast within 24 hours.
Drying Time
Curing time will vary depending on the temperature and relative humidity. Typically, Multi Purpose Primer will be dry to the touch and ready for top coating within 1-2 hours at 20 degrees Celsius (68 F)
HIGH-PERFORMANCE BONDING AGENT - Multi-Purpose Primer improves adhesion and prevents blistering to a variety of substrates, especially to wood and concrete
USE ON - Numerous surfaces including concrete, wood, high-density polyethylene, and more! Our Multi-Purpose Primer is fast drying
EASY TO APPLY - Apply using a conventional brush or roller equipment; may also be sprayed using a delivery system and nozzles appropriate for this material. Apply 1-2 coats depending on the surface and apply top coat within 24 hours when tack free
ENVIRONMENTALLY FRIENDLY - Multi-Purpose Primer is water based and non-toxic, containing no solvents and low VOC's. Safe for humans and pets alike
APPLICATION - For best results, apply to a dry surface that is free of dirt, debris, oil, silicone, laitance and efflorescence. Do not apply before the onset of rain or if dew is forecasted