Seco-Larm Enforcer Overhead Door-Mount Magnetic Contact, NC SM-226LQ

Description

The Seco-Larm Enforcer Overhead Door-Mount Magnetic Contact (NC) is designed to monitor the open/closed status of an overhead garage door or screen. The contact switch is protected by curved low-profile cast aluminum housing, which anchors to the floor. Because the contact’s wire leads are also protected inside a stainless-steel cable, vehicles can run over the unit without causing damage.
Low-profile cast aluminum housing anchors to the floor
Gray ABS case protects magnet mounted on L-shaped bracket
24" (61cm) wire leads enclosed in stainless-steel cable
Used in closed loop circuit applications
Technical Details
Gap:
2-3/4 inches (70mm)
Alarm Circuit:
3-wire NO/NC contact
Reed Switch:
Gold under-plating with deactivated rhodium outer-plating
Switch Housing:
Weatherproof die-cast aluminum
Magnet:
Extra-strength Alnico 5 magnet
Magnet Housing:
High-impact weatherproof ABS plastic case
Contact Lifetime:
50 million cycles
Rating:
0.02A/100VDC (max.); 0.2A/10VDC (max.); 3W (max.)
Temperature:
-15 to 160 degrees F (-25 to 70 degrees C)
Switch Dimensions:
4-3/8 x 1-3/4 x 7/16 inches (111 x 44 x 11 mm)
Manufacturer Part No:
SM-226LQ
UPC:
676544006466