Universal Roof Rack Cross-Bars for Car, 2 PC.

Description

The straps go through the door frames, and attach the rack on top of the roof, it fits most four door car without side rails, it fit most four door car with side rails which height is less than 6.4 cm from roof, because the distance from car roof to bottom of bar is 6.5 cm.
Comes with a pair of crossbars Heavy duty steel tube make it strong and safe. 4 PC 1/4" x 2" screw and 4 PC 1/4" lock nut.
Crossbars are adjustable in position. Install in minutes and disassemble in seconds.These cross bars will get your favorite things to anywhere.
*DO NOT OVER TIGHTEN!* 1800 lbs ratchet tie down ensures the roof bar will remain firmly on your car top. Please be careful not to over tighten.
It doesn't fit two door cars.
Product Description
Comes with a pair of crossbars 48". Heavy duty steel tube make it strong and safe. 4 PC 1/4" x 2" screw and 4 PC 1/4" lock nut.
Crossbars are adjustable in position. Install in minutes and disassemble in seconds.
*DO NOT OVER TIGHTEN!* 1800 lbs ratchet tie down ensures the roof bar will remain firmly on your car top. Please be careful not to over tighten.
Three adjustable hooks each side.
The straps go through the door frames, and attach the rack on top of the roof.
It fits most four door car without side rails, it fit most four door car with side rails which height is less than 6.4 cm from roof, because the distance from car roof to bottom of bar is 6.5 cm.
It will not fit two door car.
Step 1: Connect
Insert the polyester strap into the spindle slot, and pull the strap through, up, and back to take up any slack.
Step 2: Tighten
Securely tighten the tie-down strap by repeatedly pressing down and pulling up on the ratchet handle.
Step 3: Release
Pull the handle up and over to the open flat position. This gives the strap slack and allows for easy removal or adjusting.
Step 4: Remove
Pull the strap up to loosen, and then slip the strap out of the ratchet.