Zinsser Mold Killing Primer (rst-276049) (rst276049)

Description

Zinsser Mold Killing Primer (rst-276049)
Zinsser Mold Killing Primer (rst-276049)
Environmentally Friendly:
Yes
Assembly Required:
No
Country of Origin:
United States
Product Description
This item is brand-new, factory sealed.
Zinsser Mold Killing Primer is a protective, water-based coating that can be applied directly over existing mold, mildew and odor-causing bacteria. Featuring a proven, registered and approved antimicrobial-fungicidal agent, it not only covers over associated stains but also kills all pre-existing fungal organisms. Use it directly on nearly any dry, debris-free, non-porous, interior or exterior surface with minimal pre-cleaning in just about any residential, commercial or industrial environment: homes, offices buildings, retail establishments, schools, hospitals, factories and more. And though this primer is compatible with any topcoat product, it pairs perfectly with Zinsser PERMA-WHITE Mold & Mildew-Proof paints. To fully cover over and obscure heavy stains, particularly those caused by water leaks, a second primer coat with a tailored, stain-blocking product may be required. In such scenarios, BIN and Cover Stain primers are highly recommended. Paint Sub-Category: Primer; Water-Based; Intended Application Environment: Interior/Exterior; Finish/Sheen: Flat; Color(s): White.
Paint directly over mold, mildew and stains.
Kills existing mold, mildew and odor-causing bacteria.
Protective, water-based formula for interior and exterior use.
Binds to chalky siding, masonry, metal, plaster and more.
Ideal for residential, commercial and industrial environments.
For extensive stains, pair with a Zinsser stain-blocking primer.
Global Product Type:Building/Construction Paints & Primers
Global Product Type:Building/Construction Paints & Primers
Paint Sub-Category:Primer
Paint Sub-Category:Primer
Paint Sub-Category:Water-Based
Paint Sub-Category:Water-Based
Intended Application Environment:Interior/Exterior
Intended Application Environment:Interior/Exterior
Finish/Sheen:Flat
Finish/Sheen:Flat
Color(s):White
Color(s):White
Color Family:White
Color Family:White
Number of Colors:1
Number of Colors:1
Volume Capacity:1 gal
Volume Capacity:1 gal
Packaging Type:Bucket/Pail
Packaging Type:Bucket/Pail
Binder/Vehicle Ingredient(s):Styrene Acrylic
Binder/Vehicle Ingredient(s):Styrene Acrylic
Diluent/Solvent Ingredient(s):Ethylene Glycol
Diluent/Solvent Ingredient(s):Ethylene Glycol
Diluent/Solvent Ingredient(s):Water
Diluent/Solvent Ingredient(s):Water
Pigment/Dye/Filler Ingredient(s):Calcium Carbonate
Pigment/Dye/Filler Ingredient(s):Calcium Carbonate
Application Method:Brush
Application Method:Brush
Application Method:Roller
Application Method:Roller
Recommended Level of Ventilation:Moderate
Recommended Level of Ventilation:Moderate
Application Temperature Range:50 to 80 F
Application Temperature Range:50 to 80 F
Applicable Surface Material:Cement/Concrete
Applicable Surface Material:Cement/Concrete
Applicable Surface Material:Drywall
Applicable Surface Material:Drywall
Applicable Surface Material:Glass/Ceramics
Applicable Surface Material:Glass/Ceramics
Applicable Surface Material:Masonry
Applicable Surface Material:Masonry
Applicable Surface Material:Metal
Applicable Surface Material:Metal
Applicable Surface Material:Plaster
Applicable Surface Material:Plaster
Applicable Surface Material:Plastic
Applicable Surface Material:Plastic
Applicable Surface Material:Wood
Applicable Surface Material:Wood
Maximum Coverage Area:400 to 450 sq ft
Maximum Coverage Area:400 to 450 sq ft
Cure/Dry-Time Range:30 min (Touch)
Cure/Dry-Time Range:30 min (Touch)
Cure/Dry-Time Range:1 h (Handle/Recoat)
Cure/Dry-Time Range:1 h (Handle/Recoat)
Cure/Dry-Time Range:7 days (Full Cure)
Cure/Dry-Time Range:7 days (Full Cure)
Age Recommendation:Ages 16 and Up
Age Recommendation:Ages 16 and Up
Product Biodegradability Indicator:N
Product Biodegradability Indicator:N
Product Biodegradability in Days:0
Product Biodegradability in Days:0
Product Compostability Indicator:N
Product Compostability Indicator:N
Compliance Standards:EPA Reg. No. 87469-1-69587
Compliance Standards:EPA Reg. No. 87469-1-69587
Pre-Consumer Recycled Content Percent:0%
Pre-Consumer Recycled Content Percent:0%
Post-Consumer Recycled Content Percent:0%
Post-Consumer Recycled Content Percent:0%
Total Recycled Content Percent:0%
Total Recycled Content Percent:0%
Disclaimer Statement:Do not apply when air or surface temperatures are below 50 F (10 C) or when drying conditions are poor. Not recommended for new or unpainted metal and vinyl siding or for floors, decks and other surfaces subjected to full-immersion and/or prolonged contact with water. For optimal protection, apply topcoat product within 72 hours.
Disclaimer Statement:Do not apply when air or surface temperatures are below 50 F (10 C) or when drying conditions are poor. Not recommended for new or unpainted metal and vinyl siding or for floors, decks and other surfaces subjected to full-immersion and/or prolonged contact with water. For optimal protection, apply topcoat product within 72 hours.
Footnote 1:Recommended Dry Film Thickness (DFT) Per Coat: 1 to 2 mil
Footnote 1:Recommended Dry Film Thickness (DFT) Per Coat: 1 to 2 mil
Footnote 2:Recommended Wet Film Thickness to Achieve DFT: 2.5 to 5 mil
Footnote 2:Recommended Wet Film Thickness to Achieve DFT: 2.5 to 5 mil
Specification
Physical Characteristics
Product Color
White
Warranty
Additional Warranty Information
1 Year product replacement
Limited Warranty
1 Year
General Information
Brand Name
Zinsser
Marketing Information
Mold-killing primer features a fungicidal protective design that can be used to paint directly over all existing mold, mildew, moss, fungi, odor-causing bacteria and more. Its antimicrobial formula prevents the growth of fungal organisms on the paint film and aides in covering residual microbiological and fungal stains. Water-based primer binds chalky siding, masonry and metal.
Product Type
Mold Killing Primer
Product Name
Mold Killing Primer
Manufacturer
Rust-Oleum Corporation
Manufacturer Part Number
276049
Packaged Quantity
1 Each
Title
Product Title
Zinsser Mold Killing Primer (RST276049)
Shipping
Most orders placed prior to 11AM PST ship same business day
Some lightweight items ship Postal and can be shipped to a PO BOX. Most other orders will ship via UPS or FedEx. Please note we cannot ship UPS or FedEx to PO Box addresses.
Expedited orders will ship 2nd Day Air
Returns
This product is not eligible for return. However, you are covered under the manufacturer´s warranty for any problems or issues.
Please visit our Returns Page for more information on Excluded Items, Damage Claims, and more details on requesting RA information.
[
Read our full policy
]
About Beach Audio
Founded in August 2002, Beach Audio´s mission is to provide the best experience on the Internet for buying Consumer Electronics. We focus on making purchasing online a pleasant experience. We offer flat rate Ground shipping on all items less than 75 pounds that can be shipped via common carrier. Our sales office is located in beautiful town of Redondo Beach, California, just a few miles South of Los Angeles International Airport. We do not stock any inventory at our sales office. Instead, we ship from several warehouses located throughout the country. Our sophisticated fulfillment system will automatically ship from the warehouse location that is closest to your shipping address! Why are our prices so low? It´s simple. We have modeled our business much like a wholesaler. We sell in huge volume and have streamlined our operations to provide you with the best combination of price and service available anywhere.
Hours of Operation 8AM - 5PM PST MON - THU, 8AM - NOON PST FRIDAY
[
Read more
]
Copyright© Beach Audio Inc, 2022